Customer Service Hotline: (86)0510-83789998  
| Add to Favorites | Webmail
HOME COMPANY NEWS PRODUCT DEVICE HONOR MESSAGE CONTACT CHINESE
Current Position:Home > Product > GZGC2 SUSPENSION STAINLESS STEEL OVERLOAD DRUM
 
 
GZGC2
GZGC2 SUSPENSION STAINLESS STEEL OVERLOAD DRUM
MAIN FUNCTION AND CHARACTERISTICS

Cooperating with the energy saving,emission reducing and pollution improvement of leather industries,we have developed GZGC2 suspension stainless steel overload drum.The drum can reduce water consumption from soaking,tanning and dyeing process and consumption of chemical raw material ,so that it reduce the total emission of waste liquid.There is a new structure inside the drum,so that it makes leather softer and dyeing more even in the same process time.The drumming out of the drum will be more free but without hindrance.It can load over 33% more than ordinary drums and the loading capacity can reach to 60—70% of the drum volume.

1、The main part of GZGC2 suspension stainless steel overload drum is made up of the drum body,base,drive system,protection system,electrical control system and other parts.The auxiliary part in composed of liquid filtering(heating) circulating system,including filter,slag deposit tank,exhaust defoaming barrel,chemical material preparation barrel(with stream heater or electric heater and mixer inside),circulating pump,auxiliary control electrical box and so on.


2、The drum body is made of stainless steel sheet,with high quality insulation material filled between inner and outer shell.

3、Manual or auto-exhaust valve which is configured at one side of the drum will eliminate the pressure of the drum during working process.

4、High segmented shelves are installed inside the drum body.When the drum rotates,in can fully flip the leather and liquid regardless of the conventional load or overload capacity,making them both go under S-shape route during the flipping process,so that the leather won’t roll up even at a high speed.So there is no need to use positive and negative rotation with low speed to solve the problem that the leather will roll up.

5、The drum is equipped with automatic liquid circulation filtration system of single direction rotation.When the drum rotates along with the direction of automatic liquid circulation,the liquid inside the drum will flow out from the end of the shaft,then flow into the coaxial central tube by circulation system after filtration.By this way,it can filter out skin residues,fur and sundries in the liquid and reach the full mixture effect.Besides,when the liquid goes through the circulation system again, the content of liquid chemical material can be revised and PH value can be adjusted by human intervention,such as increase the liquid temperature or add more chemical material.

6、Auxiliary electrical control box is installed on the right side of the drum for convenience of operation.

7、Exhaust foaming device is installed to eliminate the bubble gas produced during the working process.

8、For the drive system:through the triangle rubber belt,leather belt pulley gear box and spur gear drive,the motor can make the transmission reliable and durable.The drive shaft of the gear box is configured with pneumatic brakes.

9、For the electrical control system:we adopt frequency control,PLC circuit control,pneumatic or manual control drive valve,automatic start pump at high liquid level and manual start pump at arbitrary liquid level ,etc. All can be set on the instrument controller,such as the machine temperature,rotation period,total running time,downtime and so on.




TECHNICIAL PARAMETERS
Model & Size GZGC2
250×220
GZGC2
250×250
GZGC2
300×250
GZGC2
300×300
GZGC2
350×300
Dimension of drum body mm Φ2500×2200 Φ2500×2500 Φ3000×2500 Φ3000×3000 Φ3500×3000
Size of drum opening (axial lenght×radial chord length) mm 700×700 800×800 850×1000 900×1000 1100×1200
Loading capacity m3 6.0 6.89 10.18 12.36 17.13
Soaking speed rpm 1-1.3 1-1.3 0.8-1.1 0.8-1.1 0.7-0.9
Tanning speed rpm 2-2.6 2-2.6 1.6-2.2 1.6-2.2 1.4-1.8
Retanning and dyeing speed rpm 4-5.8 4-5.8 3.3-4.8 3.3-4.8 2.8-4.1
Increased speed when
retanning and dyeing
rpm 7.2-10.5 7.2-10.5 6-8.7 6-8.7 0.7-7.4
Main motor power kw 11-15 11-15 15-18.5 18.5-22 22-30
Pump motor power kw 2.2 2.2 3 3 3
Motor power of flter kw 1.1 1.1 1.5 1.5 1.5
Motor power of mixer kw 0.37 0.37 0.37 0.37 0.37
Heating power kw 4.5~9 4.5~9 6~12 6~12 9~12
Temperature range 10-80 10-80 10-80 10-80 10-80
Outline dimension(Length) mm 4800 5100 5360 5860 6000
Outline dimension(Width) mm 3600 3600 4100 4100 4600
Outline dimension(Height) mm 4400 4400 4600 4600 5000
Total weight t 6.2 6.8 6.8 9.2 10.8
Previous:GZGSR STAINLESS STEEL CIRCULATION DYEING DRUM
Next Page:GZGC2-B SUSPENSION STAINLESS STEEL OVERLOAD DRUM
    
Global Privacy Policy | COMPANY | Site Map | Technical Support | E-mail | Contact us
COPYRIGHT © 2014 WUXI XINDA LIGHT INDUSTRIAL MACHINERY CO.,LTD ALL RIGHTS RESERVED.   
Address:No.1Rongsheng Road,Furong Industrial Park Section B,Xishan Development Zone,Wuxi City,Jiangsu Province,China
Zip Code:214192 Tel:+86-0510-83781551 / 83789998 Fax:0510-83781551
Http://www.darulmuslimeen.org E-mail:sales@xinda-chn.com

Su ICP record in ......
 
电游网