Customer Service Hotline: (86)0510-83789998  
| Add to Favorites | Webmail
HOME COMPANY NEWS PRODUCT DEVICE HONOR MESSAGE CONTACT CHINESE
Current Position:Home > Product > GZGC2-B SUSPENSION STAINLESS STEEL OVERLOAD DRUM
 
 
GZGC2-B
GZGC2-B SUSPENSION STAINLESS STEEL OVERLOAD DRUM
MAIN FUNCTION AND CHARACTERISTICS

Cooperating with the energy saving,emission reducing and pollution improvement of leather industries,we have developed GZGC2-B suspension stainless steel overload drum,especially suitable for cowhide.

The drum can reduce water consumption from soaking,tanning and dyeing process and consumption of chemical raw material ,so that it reduce the total emission of waste liquid.There is a new structure inside the drum,so that it makes leather softer and dyeing more even in the same process time.The drumming out of the drum will be more free but without hindrance.It can load over 33% more than ordinary drums,the loading capacity can reach to 60—70% of the drum volume.

1、The main part of GZGXC2 suspension stainless steel overload drum is made up of the drum body,base,drive system,protection system,electrical control system and other parts.The auxiliary part in composed of liquid filtering(heating) circulating system,including filter,slag deposit tank,exhaust defoaming barrel,chemical material preparation barrel(with stream heater or electric heater inside,can be set on high level platform or configure circulation pump if be set on low level platform),circulating pump,auxiliary control electrical box and so on.


2、The drum body is made of stainless steel sheet,with high quality insulation material filled between inner and outer shell.

3、Manual or automatic exhaust valve which is configured at one side of the drum will eliminate the pressure of the drum during working process.

4、Multi-functioned exchanger system is installed on the other side of the drum. The drum is equipped with automatic liquid circulation filtration system of single direction rotation.When the drum rotates along with the direction of automatic liquid circulation,the liquid inside the drum will flow into exchanger which equipped with stream heating device through the shaft hole on the upper side.Then the liquid flow back into the drum through the shaft hole on the lower side after heating,which can make the temperature inside the drum meet the processing requirement.Besides increasing temperature,the exchanger can be used to test temperature and PH value.Others,visible window is installed on the exchanger.

5、Long baffles with a gradient are installed inside the drum,especially suitable for cowhides as their high mechanical effect.

6、Auxiliary electrical control box is installed on the right side of the drum for convenience of operation.

7、Increase two sets of manual drainage on one side of the drum to save cleaning time.

8、For the drive system:through the triangle rubber belt,leather belt pulley gear box and spur gear drive,the motor can make the transmission reliable and durable.The drive shaft of the gear box is configured with pneumatic brakes.

9、For the electrical control system:we adopt frequency control,PLC circuit control,pneumatic or manual control drive valve,automatic start pump at high liquid level and manual start pump at arbitrary liquid level ,etc. All can be set on the instrument controller,such as the machine temperature,rotation period,total running time,downtime and so on.




TECHNICIAL PARAMETERS
Model & Size GZGXC2-B
300×300 
GZGXC2-B
350×300 
Dimension of drum body mm Φ3000×3000 Φ3500×3000
Size of drum opening (axial lenght×radial chord length) mm 1050×1180 1050×1180
Loading capacity m3 12.36 17.13
Soaking speed rpm 0.8-1.1 0.7-0.9
Tanning speed rpm 1.6-2.2 1.4-1.8
Retanning and dyeing speed rpm 3.3-4.8 2.8-4.1
Increased speed when retanning and dyeing rpm 6-8.7 5-7.4
Main motor power kw 18.5--22 22--30
Pump motor power kw 3 3
Heating power kw 6 ~ 12 9 ~ 12
Temperature range 10-80 10-80
Outline dimension(Length) mm 5700 5800
Outline dimension(Width) mm 4000 4500
Outline dimension(Height) mm 4900 5400
otal weight t 8.7 9.5
Previous:GZGC2 SUSPENSION STAINLESS STEEL OVERLOAD DRUM
Next Page:QXS SERIES WET SKIN HANGING CONVEYOR
    
Global Privacy Policy | COMPANY | Site Map | Technical Support | E-mail | Contact us
COPYRIGHT © 2014 WUXI XINDA LIGHT INDUSTRIAL MACHINERY CO.,LTD ALL RIGHTS RESERVED.   
Address:No.1Rongsheng Road,Furong Industrial Park Section B,Xishan Development Zone,Wuxi City,Jiangsu Province,China
Zip Code:214192 Tel:+86-0510-83781551 / 83789998 Fax:0510-83781551
Http://www.darulmuslimeen.org E-mail:sales@xinda-chn.com

Su ICP record in ......
 
电游网